Last Update:

You can trust our selection for Delid Tool Reviews. Because We have worked hard studying and analyzing 55687 reviews for Delid Tool and rating them. It was a difficult job to list only ten products for Delid Tool where thousands of them available online. I hope it will help you to take final decision for Best Delid Tool.

Best Delid Tool
As an Amazon Associate Everyday-Physics.com earns from qualifying purchases.


Top 10 Best Delid Tool Reviews

In this article we've included our suggestions for the Delid Tool after analyzing 55687 reviews.

Comparison Chart Of Top 10 Delid Tool

NoProductScoreAction
1OwlTree CPU Delid Tool to Remove Cover for 3770K 4770k 4790K 6700K E3-1230 7700K 8700K 115x (delid)9.8Check Price on Amazon
2Ticarus CPU Delid Tool to Remove Cover for 3770K 4770K 4790K 6700K E3-1230 7700K 8700K 115X (Delid)9.8Check Price on Amazon
3REEKON M1 Caliber Measuring Tool for Miter9.6Check Price on Amazon
4Aquacomputer Dr. Delid PROFESSIONAL Tool for Skylake9.4Check Price on Amazon
5Longdex CPU Cap Opener CPU Heatsink Delid Tool to Remove Cover for9.4Check Price on Amazon
6der8auer Delid-Die-Mate 2 Integrated Heatspreader Removal Tool9.2Check Price on Amazon
7Corsair XTM50 High Performance Thermal Compound Paste - Ultra-Low Thermal Impedance CPU/GPU - 5 Grams - w/applicator9Check Price on Amazon
8EG Starts Kaby Intel CPU Delid & Relid Compatible LGA 775 1150 1151 Skylake i3 i5 i7 Opener Cap Tool for E3 1230 1231 3770k 4590 4790k 7700k 8600k 8700K8.2Check Price on Amazon
9der8auer Delid-Die-Mate X Integrated Heatspreader Removal Tool8.2Check Price on Amazon
10Testo - 0563 3110 01 310 Residential Combustion Analyzer Kit with Printer8.2Check Price on Amazon

Table Of Content:

1. OwlTree CPU Delid Tool to Remove Cover for 3770K 4770k 4790K 6700K E3-1230 7700K 8700K 115x (delid)

  • Easy,quick and safe method to delid your Intel CPU
  • High compatibility with Intel processors
  • CPU super frequency potential perfect release
  • Lower prices in exchange for the same effect

2. Ticarus CPU Delid Tool to Remove Cover for 3770K 4770K 4790K 6700K E3-1230 7700K 8700K 115X (Delid)

  • Easy,quick and safe method to delid your CPU
  • CPU super frequency potential perfect release
  • High compatibility with processors
  • Lower prices in exchange for the same effect

3. REEKON M1 Caliber Measuring Tool for Miter

  • A BETTER WAY TO MEASURE – The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen.
  • DIGITIZE YOUR MITER SAW – Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools.
  • COMPATIBILITY – Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws.
  • INCREASED SAFETY – Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location.
  • QUICK AND EASY SETUP – Clamp to your saw fence, release the arm, input your blade thickness and begin to cut.

4. Aquacomputer Dr. Delid PROFESSIONAL Tool for Skylake

5. Longdex CPU Cap Opener CPU Heatsink Delid Tool to Remove Cover for

  • Applicable model: 3770K 4790K 6700K E3-1230 7700K 8700K 115x interface.
  • Alloy metal material, surface spraying treatment, hard and not easy to break, can completely replace bench vise, suitable for intel 115x series CPU lid opener (7700K, such as the seventh generation U).
  • The CPU is clamped back and forth by rotating the screw rod to push the slider (the CPU cannot be moved after clamping, do not worry about it will shake), and the top cover and the substrate can be separated horizontally by the front and back clamping force.
  • Steps to use the lid opener (before opening the lid, you can use a hot air blower to heat the top cover of the CPU to soften the glue, which makes it easier to open.
  • Packing quantity: 1PC base, 1PC slider, 1PC screw rod, 1PC hexagon wrench.

6. der8auer Delid-Die-Mate 2 Integrated Heatspreader Removal Tool

7. Corsair XTM50 High Performance Thermal Compound Paste - Ultra-Low Thermal Impedance CPU/GPU - 5 Grams - w/applicator

  • Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance.
  • Cools your CPU and GPU: install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures.
  • Improved CPU cooling: ultra-low thermal impedance lowers CPU temperatures vs common thermal paste.
  • Installation Made easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler.
  • Filling the gap: xtm50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer.
  • Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency.
  • Safe For You And Your PC: Non-conductive and contains zero volatile compounds.

8. EG Starts Kaby Intel CPU Delid & Relid Compatible LGA 775 1150 1151 Skylake i3 i5 i7 Opener Cap Tool for E3 1230 1231 3770k 4590 4790k 7700k 8600k 8700K

  • Safest and easiest method to delid your Intel CPU
  • Make sure that the square aluminum block is below the plastic plane.
  • Delid and Relid your CPU for maximum overclock
  • 100% compatible with Kaby lake Coffee lake
  • Relid tool fits LGA 1150 & 1151 & 1155

9. der8auer Delid-Die-Mate X Integrated Heatspreader Removal Tool

  • Practical tool for removing the heat spreader of a CPU
  • Compatible with all Intel Skylake-X and Kaby Lake-X processors using socket 2066
  • Material: Aluminium / Stainless Steel
  • Dimensions: 145 x 95 x 20 mm

10. Testo – 0563 3110 01 310 Residential Combustion Analyzer Kit with Printer

  • Wireless printer with integrated magnets for professional jobsite documentation
  • All the measurements you need, including draft and pressure
  • Fast 30-second startup so you can get testing quickly
  • Country of origin: Germany

Delid Tool Buying Guide: Features to Consider

Shopping is becoming challenging day by day, specially when you have to buy one from the thousands available and you have to do it online to save time or maintaining social distancing! With multiple options it becomes confusing. To solve your confusion we have collected as much information possible for the top 10 Delid Tool trending in the market these days. Several questions regarding this product may have aroused in your mind when choosing this product; these include:

  • Is this product worth buying?
  • What are the primary uses of Delid Tool?
  • Why should you invest in a Delid Tool?
  • What are the benefits of using it?
  • Why should you choose only the best one?
  • How to choose the best Delid Tool for yourself?
  • What are the top Delid Tool available in 2022?

With so many questions in your mind, it becomes vital for you to get answers to all the questions genuinely and authentically. Always get answers from reliable, trustworthy sources such as authority sites, product reviews, word-of-mouth, sites that offer buying guides, online consumer forums, and more sources that reliably offer such information. Overall, it is significant that we research and acquire enough information regarding the best Delid Tool before purchasing to keep the complete buying process satisfactory.

We are one of those reliable options which will offer you verified information about the top-rated Delid Tool in 2022. And, who verifies our information? Big Data and AI – the authentic and dependable online, proofreading sources. We have designed a unique algorithm code with the latest technological system to list down the top 10 Delid Tool options available this year.

Our system follows a set of factors to make the trending list, which includes:

  • Product and brand value
  • Features and specifications
  • Durability, shelf-life, and quality
  • Consumer ratings and reviews
  • Product costing and warranty

We believe that it is our responsibility and priority to offer 100% latest, up-to-date, and accurate information at all times. In this run, if you find any information unappealing, inappropriate, and wrong, then please do not hesitate to get in touch with us. We take complete charge in rectifying the issues. Happy Shopping!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *