Last Update:

You can trust our selection for Intake Manifold Gasket Sealer Reviews. Because We have worked hard studying and analyzing 57152 reviews for Intake Manifold Gasket Sealer and rating them. It was a difficult job to list only ten products for Intake Manifold Gasket Sealer where thousands of them available online. I hope it will help you to take final decision for Best Intake Manifold Gasket Sealer.

Best Intake Manifold Gasket Sealer
As an Amazon Associate Everyday-Physics.com earns from qualifying purchases.


Top 10 Best Intake Manifold Gasket Sealer Reviews

We found 57152 reviews when researching. We have considered users feedback on the Intake Manifold Gasket Sealer and our suggestions includes only the finest of them in this article.

Comparison Chart Of Top 10 Intake Manifold Gasket Sealer

NoProductScoreAction
1Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor9.8Check Price on Amazon
2Permatex 80062 High Tack Gasket Sealant9.6Check Price on Amazon
3FEL-PRO 1255 Intake Manifold Gasket Set9.4Check Price on Amazon
4Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker9Check Price on Amazon
5Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker9Check Price on Amazon
6Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-9028.8Check Price on Amazon
7Edelbrock 9300 Gasgacinch Gasket Sealer - 4 oz8.6Check Price on Amazon
8Permatex 81630 Ultra Red High Temperature Gasket Maker 3 oz8.6Check Price on Amazon
9Permatex 81160 High-Temp Red RTV Silicone Gasket8.4Check Price on Amazon
10Permatex 27036 Optimum Grey Gasket Maker 3.35 oz8.2Check Price on Amazon

Table Of Content:

1. Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor

  • Designed and calibrated for optimum marine performance
  • Single feed fuel inlet with air valve secondary type
  • Shiny silver finish and calibrated for gasoline
  • Electric choke with 4-barrel square bore carburetor flange
  • Backed by Edelbrock’s exclusive 90 day

2. Permatex 80062 High Tack Gasket Sealant

  • Reliable, fast-drying, all-purpose sealant dries to a highly tacky, non-brittle film; remains tacky indefinitely.
  • Tacky paste for holding cut gaskets in place during assembly; helps seal cut gaskets
  • Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane; sensor-safe
  • Temperature Range: -65°F to 500°F (-54°C to 260°C)
  • Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; seals any rubber, cork, paper or composite gasket.
  • Fit type: Vehicle Specific

3. FEL-PRO 1255 Intake Manifold Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair.
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development.
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road.
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.

4. Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker

  • Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
  • Fit Type: Universal

5. Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker

  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids
  • Low odor and non-corrosive formula
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.

6. Intake Manifold w/Runner Control Valve & Air Pressure Sensor Compatible with 09-17 Dodge Journey Avenger/Jeep Compass Patriot/Chrysler Sebring 1.8L 2.0L 2.4L Part# 4884495AK 4884495AH 911-902

  • WORTH YOUR EVERY PENNY】 ✴ Fair price for Dodge Jeep Chrysler 1.
  • PACKAGE】1 pcs Intake Manifold kit Includes: 1 * NEW Intake Manifold with Gasket + 1 * NEW Flow Control Valve & 1 * NEW Air Pressure Valve with Bolts and washers【NOTE】 Please reference to the first picture as shown.
  • EXCAT MATCH】 Engines: 1.
  • OE NUMBERS】 4884495AK/ 4884495AH/ 4884495AI/ 4884495AJ/ 4884495AC/ 4884495AD/ 4884495AE/ 4884495AF/ 4884495AG/ 911-902.
  • PURCHASE WITH CONFIDENCE】In BSOC AUTO Store, right parts are guaranteed.

7. Edelbrock 9300 Gasgacinch Gasket Sealer – 4 oz

  • Ensures proper sealing of all gaskets used in a manifold installation
  • Allows easy gasket removal during parts disassembly
  • Water and oil-resistant
  • Comes in re-sealable 4 ounce containers
  • This item is not for sale in Catalina Island

8. Permatex 81630 Ultra Red High Temperature Gasket Maker 3 oz

  • High temperature performance, adhesion and flexibility
  • OEM Specified, Sensor-safe, low odor, non-corrosive
  • Non-flammable, non-toxic
  • Can be used as a gasket maker or dressing and meets performance specs of OE silicone gaskets
  • Withstands up to 650°F (399°C) intermittent

9. Permatex 81160 High-Temp Red RTV Silicone Gasket

  • Formulated for hi-temp applications, or heavy-duty use
  • Replaces almost any cut gasket, and coats pre-cut gaskets to increase reliability
  • Makes reliable ‘formed-in-place’ gaskets that resist cracking, shrinking and migrating
  • Temperature range of -65F to 650F intermittent
  • Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans.

10. Permatex 27036 Optimum Grey Gasket Maker 3.35 oz

  • Sensor-safe, low odor, and non-corrosive.
  • Maximum vibration resistance, with outstanding resistance to oils, cooling fluids, and shop fluids.
  • Maximum temperature resistance: -65F to 700f(-54 DegreeC to 371 DegreeC) intermittent.
  • The most Advanced, high Temp RTV silicone gasket maker Available.
  • Includes 2 nozzles.

Intake Manifold Gasket Sealer Buying Guide


Does the thought of finding a great Intake Manifold Gasket Sealer stress you out? Has your mind been juggling between choices when it comes to buying Intake Manifold Gasket Sealer in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Intake Manifold Gasket Sealer for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Intake Manifold Gasket Sealer Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Intake Manifold Gasket Sealer in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Intake Manifold Gasket Sealer currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Intake Manifold Gasket Sealer brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Intake Manifold Gasket Sealer based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Intake Manifold Gasket Sealer before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Intake Manifold Gasket Sealer they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Intake Manifold Gasket Sealer, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Intake Manifold Gasket Sealer before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Intake Manifold Gasket Sealer will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Intake Manifold Gasket Sealer if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Intake Manifold Gasket Sealer on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Intake Manifold Gasket Sealer on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Final Words


Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Intake Manifold Gasket Sealer featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Similar Posts

Leave a Reply

Your email address will not be published.